Regulations Governing Recognition of Designated Testing Laboratory for Commodity Inspection

2022-02-10
播放模式
手機睡眠
語音選擇
Article 1
These Regulations are established in accordance with Paragraph Two of Article 13 of the Commodity Inspection Act.
Article 2
The terms used by these Regulations are defined as follows:
1. Testing laboratory: It shall mean the laboratory that performs tests.
2. The designated testing laboratory for Commodity Inspection (hereinafter referred to as the “designated testing laboratory”): It shall mean the testing laboratory that has been recognized by the Bureau of Standards, Metrology and Inspection of the Ministry of Economic Affairs (hereinafter referred to as the “BSMI”) in accordance with these Regulations and therefore may perform the required tests of commodities subject to legal inspection.
Article 3
The testing laboratory applying for recognition shall possess any of the following qualifications:
1. Administrative bodies or institutions of the Republic of China;
2. Domestic public or private college, university, or higher;
3. Domestic non-profit juristic persons; or
4. Depending upon different geographic areas, testing categories, testing items, commodity categories or further requirements, other juristic persons that have been announced and opened for application for recognition by the BSMI in reference to international practice.
Article 4
The testing laboratory applying for recognition shall fulfill the following conditions:
1. Complying with the following criteria:
(1) Common criteria: CNS 17025 or ISO/IEC 17025; and
(2) Particular criteria: Any other particular criteria of technical and quality management requirements other than the preceding common ones for a particular testing category.
2. Possessing necessary testing equipment, facility, personnel, and management system; possessing ample information and a full understanding of inspection standards as well as applicable laws and regulations for the commodity to be tested; the testing and related activities facility shall not violate Regional Plan Act, Urban Planning Law, Spatial Planning Act, Building Act or other relevant laws and regulations;
3. The personnel responsible for ensuring technical effectiveness and quality management shall possess the following qualifications:
(1) The personnel responsible for ensuring technical effectiveness shall possess a college or university degree or higher in related field, testing-related professional training, and an on-hand experience of related product testing for three years or higher; or possess testing-related professional training, and an on-hand experience of related product testing for five years or higher;
(2) The personnel responsible for quality management shall possess a college or university degree or higher, quality management-related professional training, and an on-hand experience of quality management in related product testing for three years or higher; or possess quality management-related professional training, and an on-hand experience of quality management in related product testing for five years or higher.
4. The report signatory shall be designated, possess the qualifications in item one of preceding subparagraph and possess the following conditions:
(1) The report signatory shall not act as both the personnel responsible for ensuring technical effectiveness and quality management.
(2) The report signatory shall not serve in the designated testing laboratories of other institutions, schools or juristic persons.
(3) The report signatory shall not be replaced according to article 17-1 within three years.
5. The personnel responsible for testing shall not serve in the designated testing laboratories of other institutions, schools or juristic persons.
Depending upon different geographic areas, testing categories, testing items or commodity categories, the BSMI may designate and announce that the testing laboratory applying for recognition shall be granted an accreditation that also demonstrates compliance with the requirements set out in the preceding paragraph by a domestic accreditation body who is the signatory of the International Laboratory Accreditation Cooperation Mutual Recognition Arrangement (ILAC MRA) (hereinafter referred to as "the domestic accreditation body").
Depending upon testing categories, the particular criteria in subparagraph 1 and the necessitated testing equipment in subparagraph 2 of the first Paragraph of this Article shall be prescribed by the BSMI.
The testing laboratory applying for recognition before the amendments of these Regulations take effect upon the date, 10 February 2022, shall fulfill the amended conditions if a recognition certificate for designated testing laboratory has not be issued after the date.
Article 5
The testing laboratory possessing the qualifications and fulfilling the conditions set forth under the preceding two Articles may apply for recognition from the BSMI by submitting an application form and the following documents:
1. Certificates and documents complying with the qualifications set forth under Article 3;
2. Quality Manual of the testing laboratory;
3. System structure and overview list for quality documents;
4. The brief chart for the system of calibration traceability of testing equipment and overview list for the testing equipment;
5. Organization chart and brief layout of the testing laboratory;
6. Brief map for location of the testing laboratory;
7. The relevant certificates and documents of testing laboratory personnel responsible for ensuring technical effectiveness, quality management, and the report signatory who comply with the qualifications set forth under Subparagraph 3 and Subparagraph 4, Paragraph One of the preceding Article;
8. The proofs of domestic testing facility of land and buildings in accordance with Regional Plan Act, Urban Planning Law, Spatial Planning Act, Building Act or other relevant laws and regulations; and
9. Other documents designated by the BSMI.
If the preceding applicant is physically located in foreign countries, the applicant should commission an agent who has domestic residence or business place to apply for recognition.
Article 6
The testing laboratory that has passed a document review and an on-site assessment by the BSMI shall be granted recognition on the scope of testing receiving said review. A recognition certificate for designated testing laboratory shall be issued.
Article 7
If the assessment result of the testing laboratory shows major defects, the application for recognition shall be denied. If minor defects are shown but the testing laboratory still can operate effectively, the BSMI shall inform the testing laboratory to submit a corrective action plan for further review within a given time limit. If no submission is being made by the required time frame or the submitted corrective action plan cannot effectively correct the defects, the application for recognition shall be denied.
The preceding major and minor defects shall be judged by the following principles:
1. Major defects: It shall mean defects occurred as a result of the fact that a management system and the technical competency of testing have not been established or have been established but the implementation does not follow the operation procedures, thereby causing gross defect and a failure in the testing operation or significantly reducing the effects;
2. Minor defects: It shall mean defects occurred as a result of the fact that although a management system and the technical competency of testing have been established and the implementation follows the operation procedures, the deficiency has been found not to such an extent as to cause a failure in the testing operation or said defects occur accidentally.
Article 8
The preceding testing laboratory that has been denied for recognition may apply for a second assessment within 3 months after receiving the notice.
If the second assessment still denies the application for recognition, the testing laboratory shall not re-apply for recognition within 3 months after receiving the notice.
Article 9
The term of validity for the recognition shall be in a period of 3 years. The designated testing laboratory shall request for extension by submitting an extension application form and relevant documents 6 to 2 months prior to the expiration of the designation. The extension request shall be denied if the application is made after the required time period.
A certificate shall be issued if the re-assessment and review find conformity for the preceding extension request.
Article 10
The BSMI shall perform routine or non-routine surveillance on the designated testing laboratory.
The preceding surveillance shall be performed at least once a year. However, the frequency of said surveillance shall be increased if special circumstances arise.
Article 11
If surveillance finds that the designated testing laboratory has major defects, the corrective action shall be completed within a 30-day period.
Upon the expiration of the preceding period, the BSMI shall perform a second surveillance.
If surveillance finds minor defects but the designated testing laboratory still can operate effectively, the designated testing laboratory shall submit a corrective action plan to the BSMI within a given time limit.
Article 12
The designated testing laboratory shall participate in the proficiency testing program designated by the BSMI.
If the proficiency testing finds that the technical competency of the designated testing laboratory fails to conform to relevant requirements, the BSMI shall inform the testing laboratory to improve by a given time limit and the improvement progress shall be included within the scope of re-assessment or surveillance.
Article 13
If the designated testing laboratory has been relocated to a new address, a new application for recognition shall be submitted.
Article 14
If any changes occur to the items specified in the recognition certificate, the designated testing laboratory should apply for a replacement of the certificate to the BSMI by submitting an application form and relevant documents.
When the designated testing laboratory applies for addition of testing site or items, the BSMI shall conduct an on-site assessment. However, a document review or surveillance may substitute the assessment if necessary.
When the report signatory has been changed, the designated testing laboratory shall submit the said change to the BSMI for approval and reference.
Article 15
The designated testing laboratory shall be capable of performing complete testing work by itself. However, with an approval by the BSMI, it may perform testing at other sites or subcontract the whole or a part of the testing work to another testing laboratory that complies with the requirements set out in subparagraph 1, Paragraph One of Article 4.
The testing record and relevant technical documents for commodity subject to legal inspection and tested by the designated testing laboratory shall be documented in a detailed record.
The preceding testing record and relevant documents shall be retained for at least 5 years. However, the retention period shall follow the particular criteria when it is set out in the particular criteria for a particular testing category.
The BSMI may request the designated testing laboratory to provide the test report, the testing record and relevant technical documents mentioned in Paragraph Two within a time limit.
Article 16
The BSMI may request the designated testing laboratory to provide relevant documents for review and examination. The BSMI may also send its personnel to the designated testing laboratory to verify said documents. The designated testing laboratory shall not evade, impede, or reject unless good cause is shown.
Article 17
If the testing laboratory applying for recognition has been granted an accreditation by the domestic accreditation body that also demonstrates compliance with the requirements set out in Paragraph One of Article 4, the application for recognition and management procedures may be simplified as follows:
1. Exemption from submitting the paperwork and document required by Paragraph One of Article 5;
2. Exemption from on-site assessment set out in Article 6;
3. Exemption from the re-assessment for extension in accordance with Paragraph 2 of Article 9; and
4. Exemption from surveillance in accordance with Article 10.
Where the recognition is granted in accordance with the preceding Paragraph, the term of validity of recognition is the same as the term of validity of the accreditation mentioned in the chapeau of the preceding Paragraph. The term of validity of recognition certificate witch be issued for applying extension in accordance with Article 9 is also the same.
The simplified procedures set out in subparagraphs 3 and 4 of the first Paragraph shall be applicable to designated testing laboratories that obtain accreditation by the domestic accreditation body demonstrating compliance with requirements set out in Paragraph One of Article 4 after they have been granted recognition. The term of validity set out in the preceding Paragraph shall also be applicable.
Article 17-1
If a designated testing laboratory has any of the following circumstances, the BSMI may notice the designated testing laboratory to replace the report signatory within the given time limit. The designated testing laboratory shall submit the said within 7 days after replacing to the BSMI for reference.
1. Unable to provide the testing record;
2. Where the contents of the testing record dose not match the test report;
3. Where the testing methods does not comply with inspection standards or technical regulations;
4. Where the testing records or relevant technical documents have been found to contain false or incorrect statement; or
5. The report signatory has other circumstances that have not fulfilled the responsibility of review, which is determined affecting the correctness or authenticity of the test report by the BSMI.
Article 17-2
The testing laboratory witch be granted recognition before the amendments of these Regulations take effect upon the date, 10 February 2022, shall provide the proofs of mentioned in Subparagraph 8 of Article 5 within 3 months. Where the designated testing laboratory has failed to submit the proofs within the given time limit, the BSMI shall notice the designated testing laboratory to provide corrective action plan within the given time limit.
For the designated testing laboratory witch has failed to submit the proofs mentioned in the preceding paragraph, unless otherwise specified, the date of recognition expiry of the scope of testing involved in the testing facility shall be determined according to the following circumstances:
1. If the original date of recognition expiry exceeds 31 December 2023, the date of recognition expiry will end on 31 December 2023; or
2. If the original date of recognition expiry not exceeds 31 December 2023, the date of expiry of recognition certificate witch be issued for applying extension in accordance with Article 9 is 31 December 2023. The testing laboratory applying for extension in accordance with Article 9 before the amendments of these Regulations take effect upon the date, 10 February 2022, the date of expiry of recognition certificate is also 31 December 2023 if a recognition certificate has not be issued after 10 February 2022.
If the designated testing laboratory submit the proofs of mentioned in Subparagraph 8 of Article 5 before 31 December 2023, or apply for changes testing facility eliminating the scope of land and buildings not in accordance with relevant laws and regulations, and be approved by the BSMI, the regulations in the preceding Paragraph may be exempted.
If the designated testing laboratory has failed to submit the proofs of mentioned in Subparagraph 8 of Article 5 before 31 December 2023, shall not be permitted to apply for extension in accordance with Article 9. If the circumstances can not be done due to causes not attributable to the designated testing laboratory, or other special circumstances approved by the BSMI, the designated testing laboratory shall be permitted to apply for extension 2 times.
Article 18
If a designated testing laboratory has any of the following circumstances, the BSMI may temporarily suspend the right of the designated testing laboratory to issue the test report and to perform relevant testing activities in whole or a part of relevant testing categories in the name of a designated testing laboratory within a certain period of time. The BSMI shall resume the right after the designated testing laboratory has completed the corrective action and be examined and approved by the BSMI:
1. In accordance with subparagraph 2, Paragraph One of Article 4, the testing and related activities facility has violate Regional Plan Act, Urban Planning Law, Spatial Planning Act, Building Act or other relevant laws and regulations within the given time limit after receiving a notice to correct by a given time limit. Having circumstances in Article 17-2 shall fulfill the regulations of Article 17-2 not be applicable to this subparagraph;
2. Having violated the provision of subparagraph 4 or 5, Paragraph One of Article 4 within the given time limit after receiving a notice to correct by a given time limit;
3. Where major defects have been found by two consecutive surveillance in accordance with Article 10;
4. Where the result of the second surveillance set forth in Paragraph 2 of Article 11 is not satisfied, or the corrective action plan is not submitted within the prescribed timeframe as required under Paragraph 3 of the same Article or the submitted corrective action plan cannot effectively correct the defects;
5. Having failed to participate in the proficiency testing program designated by the BSMI;
6. Where the designated testing laboratory has been found to be not in conformity with the requirements in two consecutive proficiency testing program;
7. Where the designated testing laboratory has failed to submit documents within the given time limit after receiving a notice to submit by a given time limit unless good cause is shown;
8. Having violated the provision of Article 16 by evading, impeding or rejecting the review, examination or verification;
9. Where the accreditation of the designated testing laboratory has been temporarily suspended by the domestic accreditation body and the recognition of which is granted in accordance with Article 17;
10. Having failed to replace the report signatory within the given time limit after receiving a notice to correct by a given time limit or failed to submit the said within 7 days after replacing to the BSMI for reference, in accordance with Article 17-1;
11. Having failed to submit corrective action plan within the given time limit after receiving a notice to submit by a given time limit, in accordance with Paragraph One of Article 17-2;
12. Having failed to take appropriate actions and cooperate with the BSMI in handling surveillance, appeals, complaints and disputes and have further not cooperated with the BSMI after receiving a notice to cooperate;
13. Having rejected the application for product testing within the scope recognized by the BSMI, unless good cause is shown; or
14. Other circumstances that are deemed by the BSMI as having unfavorable impact on the good practice for commodity inspection or quality of testing operation.
Article 19
Where the recognition of a designated testing laboratory was acquired through fraudulent means, the BSMI shall revoke such recognition.
Within 3 years after the recognition of a designated testing laboratory is revoked, it shall not be permitted to apply for the recognition on the testing category with the same or similar testing laboratory.
Article 20
The BSMI shall rescind the recognition if a designated testing laboratory has any of the following circumstances:
1. Where an application to cancel the recognition has been initiated by the testing laboratory;
2. Where a major defect has been found by the BSMI’s second assessment required by Paragraph Two of Article 11;
3. Where the accreditation for the designated testing laboratory has been rescinded by the domestic accreditation body and the recognition of which is granted in accordance with Article 17;
4. Where the testing records or relevant technical documents have been found to contain false or incorrect statement;
5. Where the testing laboratory losses the ability to perform business functions or is unable to conduct the testing activities impartially and effectively;
6. Where the testing laboratory issues a test report in the name of a designated testing laboratory in a testing category beyond the scope of recognition or has been suspended related rights in accordance with Article 18;
7. Where the testing laboratory has failed to complete the corrective action within a given time limit set out in Article 18 and be examined and approved by the BSMI;
8. Where the procedural fees due were not paid, and have further been not paid within the given time limit; or
9. Other violation of these Regulations that are deemed as substantial and material events by the BSMI.
When the designated testing laboratory apply for cancel of the recognition in accordance with subparagraph 1 of the preceding Paragraph and the designated testing laboratory has a circumstance of subparagraph 2 to 9 or the likely occurrence of such circumstances, the BSMI shall reject the application.
Within 3 years after the recognition of a designated testing laboratory is rescinded, it shall not be permitted to apply for the recognition on the testing category with the same or similar testing laboratory, except for Subparagraph 1 of the first Paragraph or a special circumstance that has been approved by the BSMI.
Article 21
A testing laboratory that has been recognized by the BSMI through an international cooperation or a mutual recognition agreement shall be deemed as a designated testing laboratory.
The National Certification Body (NCB) and its associated CB Testing Laboratory (CBTL) under the Certification Bodies’ Scheme of the IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE CB Scheme) may apply to the BSMI for registration; for CBTLs, the application for registration shall be made via the NCB. The scope shall be limited to those designated and announced by the BSMI. The CB Test Certificates attached with test reports issued by the registered NCBs and its associated CBTLs may be reviewed and tested by a domestic designated testing laboratory to verify compliance of the products with the designated inspection standards. Based on the verification results, the domestic designated testing laboratory may issue its test reports.
A domestic designated testing laboratory that has been approved by the BSMI and the foreign competent authority through an international cooperation or a mutual recognition agreement may sign a mutual recognition agreement for test reports with a foreign testing laboratory. The foreign testing laboratory which has signed a mutual recognition agreement for test reports issues a test report in accordance with the designated inspection standards of the BSMI. The test report may be reviewed and tested by the domestic designated testing laboratory to verify compliance of the products with the designated inspection standards. Based on the verification results, the domestic designated testing laboratory may issue its test reports.
Article 22
These Regulations shall take effect upon the date of promulgation.